-40%

NEW Tyco / Kilovac EV200AAANA 500+ Amps, 12-900 VDC SPST-NO Contactor / Relay

$ 25.33

Availability: 25 in stock
  • All returns accepted: ReturnsNotAccepted
  • Suitable For: Interior
  • Application: Automotive
  • Current Type: DC
  • Item Width: 3 in
  • MPN: EV200AAANA
  • Maximum Amperage: 500
  • Condition: New
  • Contact Material: Brass
  • Coil Voltage: 12-24v dc
  • Number of Poles: 1
  • Model: EV200AAANA
  • Brand: Tyco
  • Current Rating: 500 amp
  • Item Height: 2 in
  • Type: High amp power relay
  • Contact Current Rating: 500+
  • Pole Configuration: SPST-NO
  • Coil Voltage Rating: 12-24 VDC

    Description

    Bulk New out of box. Hardware for posts included.
    500Amp completely sealed
    contacts are in a Inert gas vacuum for 1 million cycle high amperage dependability.
    Low parasitic draw with coil economizer attached.
    1 contactor included.
    Model Number:
    EV200AAANA
    Coil Voltage:
    12 - 24 VDC
    CE Marked:
    Yes
    Additional Information:
    ECONOMIZER ATTACHED
    Breakdown By Part Number:
    Series:
    EV200 (500+ Amp, 12-900 VDC Contactor)
    Contact Form:
    Normally Open
    Coil Voltage:
    9-36 VDC (1 = requires external coil economizer)
    Coil Wire Length:
    15.3" (390 mm) - Not sure if it has this full length anymore since removal
    Coil Terminal Connector:
    None
    Mounting & Power Terminals:
    Bottom Mount & Male 10mm x M8 Terminals
    Key Features:
    Designed to be the smallest, lightest weight, lowest cost sealed contractor in the industry with its current rating (500+ A carry, 2000 A interrupt at 320 VDC)
    Built-in coil economizer - only 1.7 W hold power @ 12 VDC and it limits back EMF to 0 V.
    Optional auxiliary contact for easy monitoring of power contact position.
    Hermetically sealed - intrinsically safe, operates in explosive/harsh environments with no oxidation or contamination of coils or contacts, including long periods of operation.
    Versatile coil/power connections.
    CE marked for EC applications.
    AiAG QS9000 designed, built and approved.
    Typical Applications:
    Battery Switching and Back-Up
    DC Voltage Power Control
    Circuit Protection and Safety
    Specifications:
    Contact Arrangement, Power Contacts:
    1 Form X (SPST-NO-DM)
    Rated Operating Voltage:
    12 - 900 VDC
    Continuous (Carry) Current, Typical:
    500 @ 85°C, 400 mcm conductors
    Make/Break Current at Various Voltages
    1/
    :
    See datasheet.
    Break Current at 320 VDC
    1/
    :
    2,000 A, 1 cycle
    3/
    Contact Resistance, Typical (@ 200 A):
    0.2 mohms
    Load Life:
    See datasheet.
    Mechanical Life:
    1 Million cycles
    Contact Arrangements, Auxiliary Contacts:
    1 Form A (SPST-NO)
    Aux. Contact Current, Max.:
    2 A @ 30 VDC / 3 A @ 125 VAC
    Aux. Contact Current, Min.:
    100 mA @ 8 V
    Aux. Contact Resistance, Max.:
    0.417 ohms @ 30 VDC / .150 ohms @ 125 VAC
    Operating Time @ 25°C:
    Close (includes bounce), Typical:
    15 ms
    Bounce (after closing only), Max.:
    7 ms
    Release (including arcing), Max. @ 2000 A:
    12 ms
    Dielectric Withstanding Voltage:
    2,200 Vrms @ sea level (leakage < 1 mA)
    Insulation Resistance @ 500 VDC:
    100 megohms
    2/
    Shock, 11 ms 1/2 Sine, Peak, Operating:
    20 G
    Vibration, Sine, 80-2000 Hz, Peak:
    20 G
    Operating Ambient Temperature:
    -40°C to +85°C
    Weight, Nominal:
    .95 lb (.43 kg)
    Coil Operating Voltage (Valid Over Temperature Range):
    Voltage (Will Operate):
    9 - 36 VDC
    Voltage, Max.:
    36 VDC
    Pickup (Close) Voltage, Max.:
    9 VDC
    Hold Voltage, Min.:
    7.5 VDC
    Dropout (Open) Voltage, Min.:
    6 VDC