-40%
5Pcs New Multifunction Delay Trigger Timing Chip Mudule Timer IC Timing 2s-1000h
5Pcs New Multifunction Delay Trigger Timing Chip Mudule Timer IC Timing 2s-1000h
5Pcs New Multifunction Delay Trigger Timing Chip Mudule Timer IC Timing 2s-1000h

5Pcs New Multifunction Delay Trigger Timing Chip Mudule Timer IC Timing 2s-1000h

$ 0.94

Availability: 69 in stock
  • Brand: Unbranded
  • Condition: New

    Description

    Product Description
    5Pcs Multifunction Delay Trigger Timing Chip Mudule Timer IC Timing 2s - 1000h
    Product Descriptions
    Specifications:
    Shape about 12mm * 12mm, operating voltage 2v-5v,
    timing can be set to a minimum to a maximum of 2 seconds 1,000 hours, as indicated below description
    Function and Design
    1. The circuit according to claim connected and set a good time resistance and supply voltage;
    2. Before the power not trigger output is high;
    3. Trigger terminal "falling" trigger effective immediately
    after the trigger output terminal goes low at the same time start the timer circuit;
    4. Set the timer time to recover after the output terminal is high, wait for the next "falling" trigger;
    5. The chip is not repeated triggered, meaning that
    continue to trigger in the period after the trigger chip output low if the trigger is invalid;
    6. The trigger end of "falling" Trigger refers to the instantaneous change from high level to a low level;
    7. General refers to VCC high voltage, low means 0-0.3v or GND,
    provided that they meet the level requirements can be;
    8. trigger terminal can be connected to touch switch or microcontroller IO port or
    other digital circuits have a "falling" can effectively trigger;
    9. The trigger can be designed to power, only to trigger a short circuit to ground, power is triggered,the time to recover after the output to a high level, waiting for the next Falling edge trigger again.
    Chip Features:
    1. The use of low-power CMOS technology, lead-free and environmentally friendly.
    2. Direct Push can output low LED
    (please add current limiting resistor), the output high may push transistor (please add current limiting resistor).
    3.   Available resistance adjusting timing, there are 8 * N (N = 0.1.2.3)   times the timing selection,
    time can be adjusted from 2s-1000h.
    4. Optional trigger timing and triggering termination ground electric timer.
    5. standby output high, falling edge trigger, post-trigger output low, after the delay recovery high.
    Payment
    Instant Paypal payment is the preferred method of payment.
    We also accept payment via PayPal, Debit Card, Visa, MasterCard, Discover, and American Express.
    We will only ship to the confirmed Paypal shipping address given with the payment.
    We do not offer local pickups.
    Shipping
    This product is warehoused in California, USA.
    We will be shipping out the item within
    3
    business day.
    USPS is our preferred carrier. The item usually arrives within
    2-9 business days
    after shipped.
    We ship to PayPal confirmed address only. Please make sure your PayPal address is up-to-date.
    Returns
    We offer  30 days 100% money back guarantee.
    Buyer pays return shipping cost.You must contact us to request a Return Authorization Number (RA#) before you send anything back.
    Return without RA# must include eBay user ID/specific reason.
    We will resolve any issue for our buyers.
    Original shipping charges are non-refundable.
    Buyer pays return shipping.
    Appreciate your understanding!
    Please do not hesitate to contact us through eBay contact seller link for any issues or questions!
    Contact Us
    All E-mail or eBay message take us around 24 hours to respond.
    we do not answer any E-mails or eBay messages on weekend.
    Feedback
    We give positive feedback immediately after payment is received.
    Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback. Our customer service will make best effort to help you with the issues.
    powered by